LED Panel Light Casting

6-9 Watt
  • Aluminium Used : ADC12, LM2, LM6
  • Outer Dimension : 115mm x 115mm
  • Cut Out Dimension : 95mm x 95mm
  • Powder Coating : Matt White, Texture White
  • Shape : Round, Square

LED Panel Light Casting

12-15 Watt
  • Aluminium Used : ADC12, LM2, LM6
  • Outer Dimension : 160mm x 160mm
  • Cut Out Dimension : 145mm x 145mm
  • Powder Coating : Matt White, Texture White
  • Shape : Round, Square

LED Panel Light Casting

18-22 Watt
  • Aluminium Used : ADC12, LM2, LM6
  • Outer Dimension : 210mm x 210mm
  • Cut Out Dimension : 195mm x 195mm
  • Powder Coating : Matt White, Texture White
  • Shape : Round, Square

LED Panel Light

6-9 Watt
  • Color Temperature : 3500,4500,6500
  • Power Factor : 0.9
  • Lumens : 26-28 per chip
  • Warranty : 2 years
  • Shape : Round, Square

LED Panel Light

12-15 Watt
  • Color Temperature : 3500,4500,6500
  • Power Factor : 0.9
  • Lumens : 26-28 per chip
  • Warranty : 2 years
  • Shape : Round, Square

LED Panel Light

18-22 Watt
  • Color Temperature : 3500,4500,6500
  • Power Factor : 0.9
  • Lumens : 26-28 per chip
  • Warranty : 2 years
  • Shape : Round, Square

Diffuser Sheet

These Light Diffuser Films are one or two side diffuser film products designed to break up and distribute light evenly. The film will reduce led hot-spots typically associated with LEDs. There are two main grades, a one sided matte clear film and a one or two sided translucent, matte finish film. They are designed to be used for different back lighting applications and come in a variety of thicknesses.

LGP Sheet

The light guiding prismatic sheet LGP de-couples light, which is fed into the sheet from the small end, across the wide surface area by the means of integrated prismatic optics. Light sources may be used as CCFL, linear LED lines or even T5 tubes. The primary light emitting area has usually a plane surface while the rear surface carries the micro prism structure. The micro prism structure is not acting as a diffusor, but uses reflection (direct portion of light ~ 60%) and refraction (indirect portion of light ~ 40%) with prism structures. The direct portion of light is usually also de-glared. Without light fed in from the edges, the LGP plate appears almost transparent.

Reflective Paper

LED Reflectors, the parts made of high reflectivity materials that are designed to maximize light output by directing the light emitted from an LED light source

LED Drivers

  • Watt Range : 6 - 22 watts
  • Power Factor : 0.95
  • Isolated : Yes
  • Warranty : 2 Years
  • Made In India